Ruby Tech Switch GS 1108C User Guide

R
RUB  
TECH  
Gigabit Switch  
Networking & Communications  
Web Smart Switch  
GS-1108C  
GS-1108C: 8-Port Web-Smart Gigabit Ethernet Switch with 2 SFP Dual Media  
Key Features  
Benefits  
Standard compliance  
---IEEE 802.3 10Base-T Ethernet  
(twisted-pair copper)  
---IEEE 802.3u 100Base-T Ethernet  
(twisted-pair copper)  
---IEEE 802.3ab 1000Base-T Ethernet  
(twisted-pair copper)  
---IEEE 802.3z 1000Base-X Ethernet  
---IEEE 802.3x Flow Control capability  
---ANSI/IEEE 802.3 Auto-negotiation  
---IEEE 802.1q VLAN  
Noise free fanless design for home and SOHO users  
Home and SOHO users are always working in a small and limited space,  
therefore, noise free fanless switch becomes necessary and important.  
QoS supports layer 4 classification  
The switch supports not only Layer 2 802.1p Priority Queue control, but also  
supports programmable higher layer classification and prioritization to enable  
enhanced Quality of Service (QoS) support for real time applications base on  
information taken from Layer 2 to Layer 4, such as VoIP.  
RoHS Compliance  
Port Mirroring  
Subscriber Interface  
---8 Gigabit Ethernet ports  
---Auto-negotiation  
Port mirroring copies traffic from a specific port to a target port. This  
mechanism helps track network errors or abnormal packet transmission  
without interrupting the flow of data.  
---Auto-MDIX  
---Back pressure flow control for half  
duplex  
---Flow control for full duplex.  
---Port 7,8 are TP/SFP Fiber auto sense  
---Connector: 8 RJ-45 and 2 SFP  
module  
VLAN for performance & security  
The VLAN feature in the switch offers the benefits of both security and  
performance. VLAN is used to isolate traffic between different users and thus  
provides better security. Limiting the broadcast traffic to within the same VLAN  
broadcast domain also enhances performance.  
Performance  
Port Trunk for Bandwidth Aggregation  
Switching capacity:  
The Gigabit ports can be combined together to create a multi-link load-sharing  
trunk. Up to 4 Gigabit ports can be set up per trunk. The switch supports up to  
4 trunking groups. Port trunks are useful for switch-to-switch cascading,  
providing very high full-duplex speeds.  
---16 Gbps forwarding bandwidth for  
switch, non-blocking switch fabric  
---Wire speed performance  
---8 K MAC addresses  
---144KB on-chip frame buffer.  
---Jumbo frame support.  
VLAN  
Trap Event for Exception Management  
We use SNMP Trap mechanism to inform supervisor to know the instant  
abnormal status of the switch.  
---Port-base VLAN  
---IEEE802.1q tag-base VLAN, 4094  
Max  
QoS  
2 Dual Media ports for Flexible Fiber Connection  
Port 7, 8 dual media ports are provided for flexible fiber connection. You can  
select to install optional transceiver modules in these slots for short, medium  
or long distance fiber backbone attachment. Use of the SFP will disable their  
corresponding built-in 10/100/1000Base-T connections.  
---Supports Layer 4 TCP/UDP Port and  
ToS Classification  
---Supports 802.1p QoS with two level  
priority queue  
Bandwidth Control  
---Supports bandwidth rating per port  
ingress and egress rate limit 1000  
Mbps with 1Mbps increment  
Port Trunk  
---Port trunking with 4 trunking groups  
---Up to 8 ports for each group  
Broadcast Storm  
Build-in web-base management  
Instead of using CLI interface, we provide a more convenient GUI for user.  
We just need to configure switch via Web Browser. It is more quickly for user  
to familiar the method to control switch on the basis of this design.  
---Broadcast Storm suppression  
Port Mirroring  
---All port support port mirroring  
 

Quatech Power Supply ABDG ET HD101 User Guide
RCA Tablet RCT6272W23 User Guide
Remington Indoor Fireplace QFP40 User Guide
Roland DJ Equipment M 300 User Guide
Rotel CD Player RCC 940AX User Guide
Rowenta Iron DW9150 User Guide
Ryobi Saw RJ162VK User Guide
Samson Mixer SM10 User Guide
Sears Water Pump 3902514 User Guide
Sennheiser Car Stereo System EK 300 IEM User Guide