1394a 3+1 Ports NEC PCI Card RC502
User Manual
1394a 3+1 Ports NEC PCI Card RC502
User Manual
Driver Installation
Windows 98/98SE/ME
Once the IEEE 1394 Adaptor is installed and the computer is restarted, Windows will detect the
board and attempt to install driver for it.
1. New hardware “NEC Firewarden OHCI
Computer IEEE 1394 Host Controller”
found, then click “Next” to continue.
2. After Windows has found the new
hardware, Select “Search for the best
driver for your device (Recommended)”
and click “Next” to continue.
3. Select “Search for the best driver for your
device”. Uncheck all boxes and then click
“Next”.
4
1394a 3+1 Ports NEC PCI Card RC502
User Manual
4. Windows is ready to install the driver for
the device, and click “Next” to continue
installation.
5. Windows has finished the driver
installation and click “Finish”, then restart
your computer
6. If the drivers are installed successfully, you
will see the following new devices in
Device Manager.
5
1394a 3+1 Ports NEC PCI Card RC502
User Manual
Windows 2000 & Windows XP
After installing the IEEE 1394 Adaptor into an available PCI slot, Windows 2000 & Windows XP
will find the new device. It will then install the driver for it seamlessly. Finally, an “NEC Firewarden
OHCI Compliant IEEE 1394 Host Controller” will be added to your system.
Thank you for purchasing a quality Rosewill Product.
support for your product.
6
|