2.5“ USB 2.0 Hard Drive
Enclosure Kit
RF-HD25
User Guide
Rocketfish RF-HD25
2.5” USB 2.0 Hard Drive
Contents
Features.....................................................................................3
Installing your hard drive in the enclosure...................5
Connecting the enclosure to your computer..............7
Installing the software .........................................................9
Specifications.......................................................................26
Legal notices.........................................................................27
One-Year Limited Warranty.............................................29
Introduction
Congratulations on the purchase of your new Rocketfish
RF-HD25 external hard drive enclosure kit. By simply
assembling your 2.5" PATA HDD into RF-HD25, you can easily
backup, restore, and synchronize your data using the one-touch
backup button.
RF-HD25
1
Safety information
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS DEVICE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Important Safety Instructions
1
This device is to be used in temperatures of 41°F-95°F
(5°C-35°C). Temperatures exceeding these limits may
damage your HDD or the enclosure. Avoid heat sources
or direct sunlight.
2
3
This device can be stored in a humidity range of between
10% and 90%, and can be operated in a humidity range
of between 5% and 80%.
Do not connect the device to your computer without
taking precautions to avoid electrostatic discharge or
short circuits, which could damage the device or your
computer.
4
Do not place this device close to a source of strong
magnetic fields (such as PC screen, TV, radio, or speaker).
Strong magnetic fields can affect the reliability of data
transfer to and from the device.
2
5
6
Do not place anything heavy on top of the device.
Use only the accessories provided in the accessory
package.
7
8
9
Before you install or use the device, please read the User
manual and assemble the enclosure carefully.
To prevent short circuits, do not leave any metal objects
inside the enclosure when installing the hard drive.
To prevent short circuits, do not use the device close to
water, rain, or high humidity.
Features
• One-touch button to easily backup/restore/synchronize
the data between your PC and the enclosure.
• Patented strong-structure aluminum design and unique
aerodynamic cooling fin provides high-performance
heat dissipation and device protection.
• Lightweight and streamlined appearance for 2.5" IDE
HDD with plug-and-play capability.
• Cold-blue LED light and stackable design presents a
high-tech look.
• Multiple platform compatibility (PC and MAC).
• Storage capacities up to 120 GB and more.
• With Hi-Speed USB 2.0 interface (compatible with
USB 1.1).
• Simple setup and easy to use.
• Bundled with One Touch Backup software (for
Windows 2000, Windows XP, and Windows Vista™).
Notes:
To achieve USB 2.0 speeds, your drive must be connected to
a USB 2.0 host port. If it is connected to a USB 1.1 port, your
drive will operate at USB 1.1 speeds.
RF-HD25
3
System requirements
• PC or Mac with built-in Hi-Speed USB 2.0 interface
• Windows 2000, Windows XP, Windows Vista, or Mac OS
8.6 or greater
• Intel Pentium II 350 MHz compatible or G3 processor or
greater
• Minimum 128 MB RAM
Package contents
Examine the contents of the box for your RF-HD25 USB 2.0 Hard
Drive Enclosure Kit. The box should contain:
• RF-HD25 Enclosure (1)
• Hi-Speed USB 2.0 Y-Cable (1)
• Document CD containing User Guide (1)
• One-Touch Backup software CD (1)
• Carrying bag (1)
• Cleaning Cloth (1)
• Screws package (includes Allen wrench) (1)
4
2
Place the hard drive into the tray, connecting the data
connector to the corresponding connector on the
printed circuit board, then secure the drive to the tray
with four screws (provided).
6
3
Slide the assembled tray into the bottom of the
enclosure, then put the top on the enclosure with the
Rocketfish logo on the opposite end as the one-touch
button and secure it with the four screws you previously
removed.
Connecting the enclosure to your
computer
Notes:
Connect the Hard Drive Enclosure to your computer before
inserting the software CD into your optical drive.
Connecting the enclosure to your computer
To connect the enclosure to your computer:
• Plug a USB 2.0 cable into the enclosure, then plug it into
your computer. We provide a USB 2.0 Y cable in the
package, which has two standard USB A male-type
connectors. One connector is for data and bus power
and the other connector is for additional power, if
RF-HD25
7
required. When you connect the USB 2.0 Y cable to your
computer, use both A male-type connectors to make
sure the enclosure has sufficient power.
USB 2.0 A male-type
connector for data
and bus power
USB 2.0 A male-type
connector for
additional power
The operating system automatically detects and sets up the
new drive.
If the drive is correctly detected, a new drive letter is assigned
(for Macs, the new drive letter appears on your desktop) and the
Safely Remove Hardware icon appears on the bottom right side
of your taskbar.
Notes for Windows users:
If you do not see an additional drive in your system, you
must partition and format the new hard drive. Use Disk
Management in Windows 2000 or Windows XP.
8
Notes for Mac users:
Mac 8.6 - 9.2x
Highlight the Drive Icon, then select Finder > Special > Erase
Disk from the top menu bar.
Mac OS 10.x
Select Disk Utilities from the utilities folder, then choose your
external enclosure and partition and format the drive to
meet your requirements.
Installing the software
Installing the USB driver
Installing the Windows 2000, Windows XP, and
Windows Vista drivers
Before installation, make sure that your operating system has
the latest service pack installed (Windows 2000 - SP4, Windows
XP - SP2). No additional driver is required.
Installing the Mac OS 8.6, 9.x, or 10.x drivers
Before installation, make sure that you update the USB
extension to v1.4.1 (Mac OS 8.6). No additional driver is
required.
Installing the backup software
Note: This Roxio BackOnTrack software only runs on
Windows XP and Windows Vista PCs using USB mode.
Before installing the backup software, make sure that your
Windows operating system has been updated to the latest
service pack. To make sure you have the lasted service pack, run
Windows Update. No additional driver is required.
RF-HD25
9
To install Roxio BackOnTrack:
1
2
Save all files and close all programs.
Insert the included Roxio BackOnTrack CD into your disc
drive. Your computer automatically detects the CD and
the Roxio BackOnTrack Setup program runs.
3
Click Next, the Roxio End-User License Agreement screen
opens.
10
4
5
6
Read the license agreement, then click Next. The
Customer Information screen opens.
Enter your information, then click Next. The Choose
Setup Type screen opens.
Choose the setup type, then click Next.
RF-HD25
11
7
Click Install to start installation. It may take several
minutes to install the software.
8
Click Finish to complete the installation.
Backing up and restoring your files
Starting Roxio BackOnTrack
To start Roxio BackOnTrack:
1
Press the BACKUP button on the front of the enclosure.
OR
12
Click Start, Roxio, BackOnTrack, then click
BackOnTrack Home.
Backing up files
The Back Up Files project lets you easily back up important files
to a disc, hard drive, or other storage device. A Back Up Files
project can be scheduled to run daily, weekly, or monthly. Large
backups are automatically spread across as many discs as you
need.
Begin by selecting the drive, drive partition, or folder containing
the files you would like to archive. You can choose to archive all
the files in the selected path or just certain types of files. Several
preset file categories are available. Finally, schedule the project
to run on a regular basis, or click the action button to begin
recording now.
Selecting files to back up
You can back up all of the files in a selected path or limit your
project to certain file categories. The following categories can
be selected from the project window: Email, Financial, Music,
Photos, Productivity, Video and Recorded TV. You can also
create one custom category.
RF-HD25
13
By default, files will be selected based on the following criteria:
• All files in the selected path: All files on the drive or
folder you selected to archive. Files that are in use will
not be included.
• Email: All files with the following file name extensions—
.pst, .msg, .att, .mbx, .mim, .mime, .mlm, .wcm, .dbx, and
.pfc.
• Financial: All files with the following file name
extensions— .qdb, .qmd, .mn4, .mny, .tax, .txf, and .qbw.
• Music: All files with the following file name extensions—
.wav, .mp3, .wma, .ogg, .aac, .m4a, .m4p, .wpl, .asx, and
.m3u. Your entire My Music folder (Windows XP) or Music
folder (Windows Vista) is included if it is located on the
the drive or in the folder you selected to archive.
• Photos: All files with the following file name
extensions— .jpg, .jpeg, .tif, .tiff, .bmp, .gif. Your entire My
Pictures folder (Windows XP) or Pictures folder (Windows
Vista) is included if it is located on the drive or in the
folder you selected to archive.
• Productivity: All files with the following file name
extensions— .xls, .doc, .ppt, .pps, .pdf, .rtf, .mpp, .wps,
.wks, .wp, .wpd, .wp6. In Windows XP, your My
Documents folder, with the exception of your My
Pictures, My Videos, My DVDs, and My Music folders, is
included if it is located on the drive or in the folder you
selected to archive. In Windows Vista, your Documents
folder, with the exception of your Pictures, Videos, DVDs,
and Music folders, is included if it is located on the drive
or in the folder you selected to archive.
• Video and Recorded TV: All files with the following file
name extensions— .asf, .avi, .dv, .m1p, .m1v, .m2p, .m2v,
.mov, .mp2, .mp4, .mpg, .mpeg, .mpv, .qt, .vbs, .wmv, .xtl,
.dvr-ms. Your My Videos folder (Windows XP) or Videos
folder (Windows Vista) is included if it is located on the
drive or in the folder you selected to archive.
14
Tip: You can add to the list of file extensions included in any
file category by using the controls on the Backup options
panel. See “Back up files options” on page 21 for more
information.
Creating a custom category
Most computer files are defined by the two-, three-, or
four-letter extension placed at the end of their names. Plain text
files, for example, can be identified by their .txt file extension.
When you record a Back Up Files project, the program is simply
searching your computer for files with extensions that
correspond to the categories you selected. But what if you want
to archive files that aren’t included on any of the pre-defined
lists? You could choose to archive all files or edit one of the
existing categories (see “Back up files options” on page 21 for
more information), or you could create your own custom list of
file extensions that will appear as the category called My
Custom Category.
To create a custom file category:
1
2
Click Options.
Click the Backup panel name on the left side of the
Options window. The File Category options are displayed
on the right side of the window.
3
4
Click My Custom Category.
Type a file extension into the Extension text box. It is not
necessary to include the period.
5
6
Click Add. The file extension is added to the list box on
the right.
Continue adding file extensions one at a time until you
are finished.
To remove a file extension from your list, click its name in
the list box, then click Remove.
RF-HD25
15
7
Click OK to save your list as My Custom Category. This
new category is added to the list of file categories in the
project window.
Using the Back Up Files scheduler
Each time you create a Back Up Files project, you have the
option of running it immediately or scheduling the project to
run at a regular interval that you choose.
To schedule a Back Up Files project:
1
2
Open the Back Up Files project.
Set up a new project or select a saved project. See
“Creating a new Back Up Files project” on page 19 for
more information on starting a project.
3
Choose one of the scheduling options in the project
window.
Run now—The project runs after you click the action
button.
Daily—The project runs every day at the time the project
was created.
Weekly—The project runs once a week at the time and
on the day of the week the project was created.
Monthly—The project runs once a month at the time
and on the day of the month the project was created.
4
5
Save your project by clicking Save. A save window
appears.
Name the project, then click OK.
Note: If you schedule a monthly backup for the 31st day of
the month, your backup will be skipped during months with
fewer than 31 days. Backups scheduled on the 29th or 30th
day of the month will also be skipped during some months.
16
Scheduler tips
The following tips will help you to better understand the
scheduler:
• Scheduled projects must be saved before they can be
run.
• Keep the following limitations in mind if you want a
scheduled project to be completed successfully while
you are away from your computer:
• Back Up Files will not overwrite files without your
permission. This usually involves clicking on a series
of message boxes. To perform an unattended archive
project, you may need to change the hard drive
destination for your archived files or archive your files
to a disc.
• If you are archiving files onto a disc, a blank disc must
be inserted in your drive when the project starts, and
the project must fit on one disc.
• Some of the energy conservation settings available
for your computer may keep a scheduled project
from starting even if the project launcher is open.
• The Back Up Files project uses a scheduler that is part of
the Windows operating system. A system administrator
has the ability to prevent a computer user from using the
scheduler or running scheduled projects. If the Back Up
Files scheduler does not work as expected, consult your
system administrator.
• You can use your Windows scheduling software to
customize when your saved projects run. You can
schedule a project to run twice a week or once every
hour. Save your project, then edit the schedule using the
Windows Scheduler.
To run Windows Scheduler in Windows XP, click Start, All
Programs, Accessories, System Tools, Scheduled
Tasks.
RF-HD25
17
To run Windows Scheduler in Windows Vista, click Start,
All Programs, Accessories, System Tools, Task
Scheduler.
Note: See Windows Help and Support for information on
using the Windows Scheduler. Remember that scheduling
changes made directly in the Windows Scheduler are not
displayed in the Back Up Files project window.
Backup tips
• All of the discs used in a Back Up Files project must be
the same general format.
• In a multi-disc Back Up Files project, files are assigned
based on the size of the first disc you use. If your first disc
has a capacity of 650 MB, for example, no more than
650 MB will be burned on any subsequent disc, even if it
has a larger capacity. This also means that no disc in a
project can have a smaller capacity than the first disc
used in a project.
• Discs used in a Back Up Files project are closed once they
are recorded. If you use write-once discs, you will not be
able to add additional data.
• If you are using a drive that records to more than one
type of disc, you will be given the option to switch to a
different disc format after pressing the action button if
you have selected a file that will not fit on a single disc.
• To view a list of the files on a Back Up Files disc, open the
html file placed on the disc.
• Files in use by your computer’s operating system or by an
open application cannot be archived or overwritten with
the Back Up Files project. Any busy files encountered
during a backup will be listed for you to review.
• Do not open files or applications while a Back Up Files
project is in progress. This can cause the project to stop
before all of the files in the project are archived.
18
Creating a new Back Up Files project
To create a new Back Up Files project:
1
Click the Backup Files tab in the project list. A list of
projects is displayed.
2
3
Click the Back Up Files project.
Click Browse and use the Browse for Folder window to
select the drive or folder containing the files you would
like to archive.
Note: Files stored on different source drives cannot be
archived in the same Back Up Files project.
4
Select the types of files you wish to archive. Choose
either All files in the selected path or Only files in the
following categories.
If you selected Only files in the following categories,
select the file categories you would like to archive. The
choices are Email, Financial, Music, Photos,
Productivity, and Video and Recorded TV. If you
created a custom category, it will also be available. See
“Creating a custom category” on page 15 for more
information.
Note: Hold your mouse pointer over an icon to see the
category it represents.
5
6
If you want, place a check mark in the Only archive files
changed since checkbox to limit the backup to files that
have been modified since the date you select. To change
the date, click the date box arrow to open the calendar.
When you click a date in the calendar, the date is
automatically entered into the date box.
Select a destination for your archived files from the
Destination Selection list. The destination can be a hard
drive, a disc recorder, or another type of storage device.
RF-HD25
19
7
To compress or encrypt your backup, click Advanced
and select the appropriate settings:
• Compression—Click the Compress check box if you
would like the back up files created for this project to
be compressed. Compression reduces file size. The
amount of compression varies based on the types of
files you back up. Compressed files take longer to
restore than uncompressed files.
Type a password for this project in the space
provided and again in the confirmation box.
Caution: If you forget or lose your password, you will not be
able to open or restore your backup project.
8
Click the action button to run the project now. To
schedule your project, choose one of the options in
Step 3 on the project window. For more information
about scheduling a project, see “Using the Back Up Files
scheduler” on page 16.
OR
To save your project, click Save. Enter a name for the
project, then click OK.
If you decided to run the project now, a progress screen
will inform you when the project has been completed.
9
Click Done to return to the project window.
Note: Scheduled projects must be saved before they can be
run.
20
To open and run a saved Back Up Files project:
1
Click File. If the project is listed on the File menu, select
it. If the project is not listed, click Open and use the
dialog box to navigate to the project file. By default,
project files are saved in your Windows Vista Documents
folder or Windows XP My Documents folder. The
settings for that project are displayed in the project
window.
2
Change the project settings as needed. Click Save to
save your changes. (If you save the project without
changing its name, the original project is overwritten.)
3
4
If necessary, insert a blank or rewritable disc into the
selected destination drive.
Click the action button to begin recording.
A progress screen informs you when the project has
been completed.
Back up files options
Click Options on the control panel to open the Options window.
Here you find settings that can be used to customize your
application.
Each available group of options is displayed in the left pane.
Click the name of an options group, and those option settings
appear on the right.
Each panel includes a Restore Defaults button that can be
used to restore the default settings for the options on that
panel only.
Note: Not all options are available for all drives or
operating systems.
RF-HD25
21
Backup options—Backup panel
Use the Backup panel to customize the following Back Up Files
settings:
• File category options—Use this option to create a
custom file selection category or to add additional file
types to any of the preset categories.
To create a new custom category called My Custom Category:
1
Select My Custom Category from the list of file
categories.
2
3
Type a file extension into the Extension text box.
Click Add. The file extension is added to the list box on
the right.
4
Continue adding file extensions one at a time until you
are finished.
To remove a file extension from your list, click its name in
the list box, then click Remove.
Click OK to save your list as My Custom Category.
5
To add file extensions to one of the preset file selection categories:
1
Select the file category you would like to customize. The
choices are Email, Financial, Music, Photos,
Productivity, and Video & Recorded TV.
2
3
4
5
Enter the file extension you would like to add into the
Extension text box.
Click Add. The file extension is added to the list box on
the right.
Continue adding file extensions one at a time until you
are finished.
Click OK.
• Launch Back Up Files when my external hard drive is
re-connected—Select this option to easily back up files
to an external hard drive.
22
• Verify data written to the disc after burning—A check
mark in this box adds a verification step to make sure
that no errors occur during the recording of your discs.
Restoring files
The Restore Files project restores individual files and folders
that you have protected using the Back Up Files project. With
Restore Files, you select a backup, search for the files or folder
you would like to restore, and then click the action button. The
files will be restored to the location you choose.
To restore a file:
1
2
3
4
Click the Backup Files tab in the project list. A list of
projects is displayed.
Click the Restore Files project. The project window
opens.
If the backup file was saved on a disc, insert the disc into
a compatible disc drive.
Click Browse at the top of the Selective Restore project
window. A dialog box opens.
RF-HD25
23
5
6
Use the dialog box to navigate to the backup file that
contains the files you would like to restore. After you
have found the backup file, click it, then click OK. The
content of the backup file appears as a directory tree in
the project window.
Select the files and folders you would like to restore
using one of the following methods:
• Navigate through the directory tree in the project
window. When you find a file or folder you want to
restore, select it by clicking on its name.
• Type all or part of a file or folder name into the
Search box to the right of the Browse button. Click
Search. The search results are displayed in the
project window. If the file you want to restore
appears in the search results, select it by clicking
once on its name. If the file does not appear in the
search results, try using different search terms or
looking in a different backup file.
7
8
Choose Browse from the Destination Selection menu
and select the location where your restored files will be
saved.
Click the action button to begin restoring your files.
Restore files tips
• Restore Files can be used to restore as many files or
folders as you wish.
• Restore Files will not overwrite a file without getting your
permission.
• Backup files created with the Back Up Files project can be
recognized by their .rfc file name extension. If you
double-click an .rfc file, the project launcher opens with
the Back Up Files project displayed. To restore files,
switch to the Restore Files project.
24
• The Restore Files search box does not support wildcard
expressions.
• System files cannot be restored to their original location
if they are in use by your computer’s operating system.
Uninstalling the backup software
To uninstall the backup software:
1
Open the Control Panel.
2
3
Follow the on-screen instructions to remove the software
completely from your computer.
After the software is uninstalled, restart your computer if
requested.
Disconnecting the enclosure from your
computer
To disconnect the enclosure from your computer without shutting it
down:
Note:
If a drive window is open or the hard drive enclosure is
active, close any associated windows before attempting to
remove the enclosure.
1
For Windows users:
RF-HD25
25
• Right-click the Hotplug icon (located in the
notification area of the taskbar where you usually see
the time displayed.
• Select the device you want to unplug, then click STOP.
• When Windows notifies you that it is safe to do so,
unplug the enclosure from your computer.
For Macintosh users:
2
• Drag the USB icon into the TRASH.
• Unplug the enclosure.
Specifications
Hard drive type
Dimensions
Weight
2.5” IDE hard drive
3.35 × 5.20 × 0.67 inches (85 × 132 × 17 mm)
0.41 lbs. (185 g) without hard drive installed
USB Mini-type
Interface
Power supply
Main body housing
Certificate
USB power (no external power supply)
Aluminum with mirror treatment
FCC (EMI)
Temperature
Operating—41°F to 95°F (5°C to 35°C)
Non-operating—-4°F to 149°F (-20°C to 65°C)
Humidity
Altitude
MTBF
Operating—10 to 90% non-condensing
Non-operating—5 to 80% non-condensing
Operating— -984 to 39,370 feet (-300 to 12,000 meters)
Non-operating—0 to 9,842 feet (0 to 3,000 meters)
50,000 hours
26
Legal notices
FCC compliance
This device complies with Part 15 of FCC rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the
user’s authority to operate this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Copyright
© 2008 Rocketfish. Rocketfish and the Rocketfish logo are
trademarks of Best Buy Enterprise Services, Inc. Other brands
and product names are trademarks or registered trademarks of
their respective holders. Specifications and features are subject
to change without notice or obligation.
For service and support call 1-800-620-2790.
RF-HD25
27
28
One-Year Limited Warranty
Rocketfish Products (“Rocketfish”) warrants to you, the original
purchaser of this new RF-HD25 (“Product”), that the Product
shall be free of defects in the original manufacture of the
material or workmanship for one (1) year from the purchase of
the Product (“Warranty Period”). This Product must be
purchased from an authorized dealer of Rocketfish brand
products and packaged with this warranty statement. This
warranty does not cover refurbished Product. If you notify
Rocketfish during the Warranty Period of a defect covered by
this warranty that requires service, terms of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for one year (365 days), beginning on
the date you purchased the Product. The purchase date is
printed on the receipt you received with the product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Rocketfish repair center or store
personnel, Rocketfish will (at its sole option): (1) repair the
Product with new or rebuilt parts; or (2) replace the Product at
no charge with new or rebuilt comparable products or parts.
Products and parts replaced under this warranty become the
property of Rocketfish and are not returned to you. If service of
Products and parts are required after the Warranty Period
expires, you must pay all labor and parts charges. This warranty
lasts as long as you own your Rocketfish Product during the
Warranty Period. Warranty coverage terminates if you sell or
otherwise transfer the Product.
RF-HD25
29
How to obtain warranty service?
If you purchased the Product at a retail store location, take your
original receipt and the Product to the store you purchased it
from. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of
protection as the original packaging. If you purchased the
Product from an online web site, mail your original receipt and
the Product to the address listed on the web site. Make sure that
you put the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the
Product in the United States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as lightning strikes
• Accident
• Misuse
• Abuse
• Negligence
• Commercial use
• Modification of any part of the Product, including the
antenna
This warranty also does not cover:
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage supply
30
• Attempted repair by anyone other than a facility
authorized by Rocketfish to service the Product
• Products sold as is or with all faults
• Consumables, such as fuses or batteries
• Products where the factory applied serial number has
been altered or removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
YOUR EXCLUSIVE REMEDY. ROCKETFISH SHALL NOT BE LIABLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS
OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.
ROCKETFISH PRODUCTS MAKES NO OTHER EXPRESS
WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS
AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE
WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES,
WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE
WARRANTY PERIOD. SOME STATES, PROVINCES AND
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE OR PROVINCE TO
PROVINCE.
Contact Rocketfish:
For customer service please call 1-800-620-2790
RF-HD25
31
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.
55423-3645
© 2008 Best Buy Enterprise Services, Inc.
All rights reserved. ROCKETFISH is a trademark of Best Buy
Enterprise Services, Inc. Registered in some countries. All other
products and brand names are trademarks of their respective
owners.
32
RF-HD25
33
|