40-1445
Thank you for purchasing your 50W RMS/100W Max.
Powerhorn from RadioShack. Please read this user’s
guide before installing, setting up, and using your new
powerhorn.
50W RMS/100W Max.
Powerhorn
What’s Included
Powerhorn
User’s Guide
Mounting
Specifications
Impedance (Nominal)........................................................8 Ohms
Frequency Response.............................................350 ~ 9,000 Hz
Output .................................................................................110 dB
Power Handling .................................................... 50 Watts (RMS)
Maximum Power Handling ........................................... 100 Watts
Dispersion ....................................................... 90° x 20° (2000 Hz)
Dimensions (H×W×D) .........................................11 × 6½ × 8½ in
.............................................................................(28 × 17 × 22 cm)
Net Weight..............................................................3.1 lbs (1.4 kg)
Remove the powerhorn’s mounting base and use
as a template.
1. Loosen the wing nut and slide off the base.
2. Attach the base to the mounting location
and fix with three screws (appropriate to
surface) and nuts (screws and nuts not
supplied).
Specifications are subject to change and improvement without
notice. Actual product may vary from the images found in this
document.
3. Place the powerhorn back onto its base.
Limited Warranty
Wing Nut
This product is warranted by RadioShack against manufacturing defects in
material and workmanship under normal use for ninety (90) days from the
date of purchase from RadioShack company-owned stores and authorized
RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN,
RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED
WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE
DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN.
EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY
OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY
WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY
OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING
OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED
TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME,
DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
4. Adjust the powerhorn to the desired angle,
then secure the speaker in place with the
wing nut.
Caution:
•
Set the powerhorn speaker slightly
downward to prevent water collecting inside.
•
Mount the powerhorn away from heat
sources.
Some states do not allow limitations on how long an implied warranty lasts
or the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. In the event of a product
defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack
will, at its option, unless otherwise provided by law: (a) correct the defect by
product repair without charge for parts and labor; (b) replace the product with
one of the same or similar design; or (c) refund the purchase price. All replaced
parts and products, and products on which a refund is made, become the
property of RadioShack. New or reconditioned parts and products may be
used in the performance of warranty service. Repaired or replaced parts and
products are warranted for the remainder of the original warranty period.
You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to
acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow
instructions, improper installation or maintenance, alteration, lightning or other
incidence of excess voltage or current; (b) any repairs other than those provided
by a RadioShack Authorized Service Facility; (c) consumables such as fuses or
batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f)
costs of product removal, installation, set-up service adjustment or reinstallation.
Connecting
Your powerhorn is designed for connection to an
amplifier with an impedance of 8 ohm.
1. Connect the powerhorn’s black wire to the
amplifier’s negative (–) speaker terminal.
Mounting Base
2. Connect the powerhorn’s white wire to the
amplifier’s positive (+) speaker terminal.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
RadioShack Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102
12/99
©2008. RadioShack Corporation.
All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
07A08
Protect the environment by recycling used electronics. Go to
40-1445
A
Printed in Taiwan
|