32-2057
3-Channel Stereo Sound Mixer
LEFT CHANNEL/RIGHT CHANNEL — tailor sound output
to your preference by cutting or boosting
the frequency by ±12dB.
Quick Start Guide
Your 3-Channel Stereo Sound Mixer is perfect
for mixing sound from multiple audio sources,
such as microphones, tuners, CD players, or
turntables. You can adjust each audio source’s
sound level for the best mix to play through
your sound system, or for recording. This
mixer is ruggedly constructed for home or
professional use.
CUE — select a channel to monitor and prepare
for mixing when wearing headphones.
MONO/STEREO — set the sound output to
stereo or monaural.
PHONO 1/LINE 1, PHONO 2/LINE 2, LINE 3/LINE 4 — set to
the desired input sources to play.
TALK OVER ON/OFF — lower audio input volume, so
you can talk over it using the microphone.
12V/3W MAX LAMP — connect a lamp to
light up the mixer’s controls.
MIC — connect a low impedance microphone
with an XLR plug here.
MIC TREBLE — adjust the microphone’s treble.
POWER — turn the mixer on and off.
EQ — turn the equalizer on and off.
MIC BASS — adjust the microphone’s bass.
CUE LEVEL — adjust the headphone’s
volume.
ASSIGN A/ASSIGN B — select an input source
(channel) for A and B when using cross
fader. Turn to OFF to disable the cross fader.
PHONES — connect a pair of stereo
headphones with a 1/4-inch plug.
CROSS FADER — mix sound output between two sources (A and B). To
equally mix two sources, slide this control to the middle (5).
CUE/PGM — balance output play volume with the input being
prepared for mixing when wearing headphones.
DJ MIC, CH1, CH2, CH3, MASTER — adjust the volume of the selected input. The
illuminated controls help you to see in low light conditions.
Please read this quick start before
installing, setting up and using your new product
|